SOFTWARE
50
From ST100:
Press "Read ALL from ST100" button. All information will be downloaded (including the list
of ranges of mobile devices).
Press "Read from ST100" button. Only the list of mobile ranges will be downloaded.
Press "Restoring default Mobile Bands" button. The list of ranges of mobile devices used in
Russia, set by the manufacturer, will be downloaded.
1. Range adjusting:
1. To adjust the range in the list, place the cursor to corresponding line highlighted in blue.
2. Adjust the data:
initial and/or ending frequency (Fig. 39, item 4 and item 5)
title of the range (Fig. 39, item 6)
sign of activity (Fig. 39, item 2)
3. Press the "Apply Changes" button to save the made adjustments, "Cancel" button to exit
without saving the adjustments.
2. Adding a new range:
1. Place the cursor on an "empty" line.
2. Enter data on the parameters of the new range:
initial and/or ending frequency (Fig. 39, item 4 and item 5)
title of the range (Fig. 39, item 6)
sign of activity (Fig. 39, item 2)
3. Press the "Apply Changes" button to save the information about the new range or the
"Cancel" button to exit without saving.
Restrictions when adjusting and adding ranges:
1. The maximum number of ranges (lines in the list) is 11.
2. The range should not exceed 600 MHz. If this condition is violated, a warning appears on
the screen:
"The band should be no more 600 MHz!"
3. Ranges should not "overlap". If this condition is violated, warnings appear on the screen:
"Initial Frequency > Ending Frequency"
3. Deleting a range:
To delete a range, place the cursor on the corresponding line and press the "Clear" button.
Shutting down:
Before completing, you must save the changes in any of the following ways:
Save to the PC HDD. Press the "Save to File" button and specifying the path for saving and
the file name (the list of mobile devices and information from other modes will be saved);
