ST Group ST 100 Скачать руководство пользователя страница 52

Страница: 52 / 61

SOFTWARE



Download only information about the corrections made to the ranges of mobile devices into
the ST 100 memory. Press the "Write to ST100";



Download to ST 100 information about all lists (available in all modes). Press the "Write
ALL to ST100" button.

9.7. BASE STATIONS MODE

The mode is intended for creating and updating the list of frequency ranges in which the base

stations of digital communication systems used in the region where the search operations are
carried out operate.

This information, downloded to the ST 100 memory, is used when the channel "SELECTED

RANGES" is operating in the "BASE STATIONS" mode.

To enable the mode, go to the "Base" tab.
The procedure for loading, correcting, saving data and restrictions are the same as described

in the "OPERATION IN MOBILE DEVICES MODE" section.

9.8. USER LIST MODE

The mode is intended for creating and correcting the list of frequency ranges in which the

signals of interest to the user are located.

This information, downloded to the ST 100 memory, is used when the channel "SELECTED

RANGES" is operating in the "USER LIST" mode.

To enable the mode, go to the "User List" tab.
The procedure for loading, correcting, saving data and restrictions are the same as described

in the "OPERATION IN MOBILE DEVICES MODE" section.

9.9. FIRMWARE UPDATE MODE

The firmware version number is displayed on the screen when the ST 100 is turned on (Fig. 40).

Fig.40

You can download the current version of the firmware on the website

http://spymarket.com/tp

The screen view in the "FIRMWARE UPDATE" mode is shown in Fig.41.

Содержание ST 100






























































Результаты поиска

Содержание ST 100

Отзывы:

Похожие инструкции для ST 100

Бренды по названию

Популярные бренды

ST Group ST 100, Руководство пользователя

Результаты поиска

Содержание ST 100

Отзывы:

Похожие инструкции для ST 100

Бренды по названию

Популярные бренды