SSR RAZKULL 125, Руководство пользователя

Страница: 29 / 38

Rear Tire Assembly & Disassembly
1.) Support the motorcycle via a rear swingarm stand or tied down to a motorcycle lift
with the wheels off of the ground and balanced.
2.) Loosen the chain adjuster nuts (2) on both sides so that the chain can be lifted off of
the rear sprocket and set gently on the swingarm end. Remove the rear axle nut (3).
3.) Push the rear wheel forward in the chain adjusters and lift the chain off of the rear
sprocket.
4.) Slide out the rear axle (1) (make sure you hang onto the rear brake caliper carrier
and swing it over the swingarm) then remove the rear wheel.
Reinstall the rear wheel using the reverse procedure of above. The rear axle nut torque:
[60 ft. lb. or 80N.m]
Adjustment of the rear brake and drive chain is covered in the previous chapters.
Pump the rear brake pedal several times after the rear wheel is reinstalled in order to
build up brake pressure again. The rear wheel should rotate freely after releasing the
brake.
1 2
3