SSR RAZKULL 125, Руководство пользователя

Страница: 19 / 38

Engine Break-In Procedures
In order to make sure your new motorcycle will run for years to come you must break-in the engine.
The break-in mileage of a newly purchased motorcycle is 600 miles. The primary 600 mile break-in is very important for the per-
formance and service life of the engine.
Avoid completely opening the throttle during the break-in period and selection of gears must be chosen in order to the engine
RPM below 6,500. (see the speedometer)
1.) 0 miles to 100 miles
While riding, DO NOT open the throttle more than 1/4 turn. After running the engine for 30 minutes to 1 hour, stop the engine
for 10 minutes to allow it to cool. Vary your speed and gear frequently. Don’t ride the motorcycle in a fixed throttle position or
gear.
2.) 100 miles to 300 miles
During riding, DO NOT open the throttle more than 1/2 turn. DO NOT completely open the throttle; change your speed and
gear frequently and do not drive in a fixed throttle position or gear. Low gear running is forbidden.
3.) 300 to 600 miles
During driving, DO NOT open the throttle more than 3/4 turn, change your speed and gear frequently, fast-speeds and wide
open throttle should be avoided.
Note: After running 600 miles, change the engine oil and clean the air filter. Check all other systems specified in the periodic
maintenance table at the 600 mile interval. This will keep the motorcycle in good working order and will prolong the service life
of the engine notably. If any trouble is found during run-in, please ask the agent or service station for repairing immediately.