SSR RAZKULL 125, Руководство пользователя

Страница: 25 / 38

Adjustment of the Throttle
1.) Check the throttle grip. Make sure that the throttle can be easily rotated from open
to close without binding or catching.
2.) Check the throttle cable to carburetor, make sure it is routed properly and is not
binding or sticking. Rearrange the cable as needed if routed the wrong way.
3.) Check the throttle free-play at the grip. The standard free-play travel is 2mm to
6mm.
Adjusting the Throttle:
Loosen the lock nut (1) and turn the adjuster (2).
Carburetor Adjustment
1.) Start the engine and warm it up, bring it to the normal operation temperature.
2.) Adjust the idle speed to (1500±50)r/min by adjusting the idle adjuster screw (3).Turn
the idle screw clockwise to the increase the idle speed and turn it counterclockwise to
decrease the idle speed.
3.) Adjust the screw clockwise till the engine has no idle or decelerates, then adjust it
counterclockwise until the engine is in the condition of showing no idle speed or de-
celerating again. Place the screw between the above mentioned two limit positions (the
position of the two ends) to adjust fuel and air mixture. Make a mark before adjusting
the air mixture screw, so that it will be convenient to return to the stock setting if/when
you make mistake.
4.) If the idle speed is to be changed after preparing, readjust the idle speed screw to
readjust the idle speed.
1
2
3