SSR RAZKULL 125, Руководство пользователя

Страница: 14 / 38

REDLINE OF THE RPM METER
NOTES:
Do not allow the engine RPM to stay in the redline area of the meter (1), even if the
engine has been broken in.
It is easy to rev the engine to the redline if the engine is revved while in neutral, take
care not to do so. The redline zone indicates the maximum rotational speed of the
engine. If the engine is allowed to run in the redline for prolonged periods of time the
total service life of the motorcycle could be affected.
(2) Turn Signal Switch (3) Horn Button (4)Headlight High/Low Switch (4) Passing Switch
The turn signal switch has three positions. Turn the switch to “←” position for left turn
signal, and the front and rear left turn signal lights will turn on; Turn the switch to “→”
position for right turn signal, and the right front and rear turn signal lights will turn on.
When the turn or lane change has been completed, press the switch in the middle position
to turn off the light.
Headlight High/Low Beam Switch
Turn the headlight high/low beam switch to the upper position for high beam; turn the
switch to the lower position for low beam.
Horn Button
Press down the horn button and the horn will sound.
1
5
4
3
2