SSI Single Gas Analyzer for H2, Руководство по эксплуатации

Страница: 38 / 44

Single Gas Analyzer (SGA)
Operations Manual
Super Systems Inc. Page 38 of 44 Page 38 of 51
MB_READ_NDIR_GAS_VPP_SF 1258
Peak-peak voltages. No
high/low values
MB_READ_NDIR_GAS_VPP_FIR 1262 Peak-peak voltages FIR filtered
MB_READ_NDIR_GAS_NA 1266 Gas Normalized absorbance
MB_READ_NDIR_GAS_NA_TC 1269
Gas Normalized absorbance,
temperature compensated
MB_READ_NDIR_GAS_CONC 1272 Gas concentration
MB_READ_NDIR_GAS_CONC_DP 1275 Gas concentration decimal point
MB_READ_NDIR_GAS_CONC_FP 1278 Gas concentration floating point
MB_READ_CAL_ENABLE_REG 1284 enables a calibration
MB_READ_CAL_REQUEST_REG 1285 CJ cal or zero/span voltage cal
MB_READ_CAL_RANGE_REG 1286
Calibration Range register. Sets
the voltage gain for a
calibration.
MB_READ_CAL_CHANNELS_REG 1287
bitmap of channels to be
calibrated
MB_READ_CAL_VALUE_REG 1288 Calibration value
MB_READ_CAL_TIMER_REG 1293 First of 5 calibration timers
MB_READ_CAL_PROGRESS_REG 1294
0 = no calibration, 1 = calibration
in progress
MB_READ_CAL_ERROR_REG 1295
First of 5 calibration error
calculations
MB_DIGIO_OUTPUT_SET 1600
Bitmap that sets the output of a
digital I/O card
MB_DIGIO_COMM_STATUS_REG 1601
Communication status for
digital I/O card
MB_DIGIO_VERSION_NUMBER 1610
current version number of the
firmware
MB_DIGIO_UART_1_MODE 1611
Determines mode: modbus
slave = 0, modbus master = 1
MB_DIGIO_UART_1_BAUD_RATE 1612 Baud Rate.
MB_DIGIO_UART_2_MODE 1613
Determines mode: modbus
slave = 0, modbus master = 1
MB_DIGIO_UART_2_BAUD_RATE 1614 Baud Rate.
MB_DIGIO_BOARD_ADDR 1615
Board modbus address
(important for slave only)