SSI Single Gas Analyzer for H2, Руководство по эксплуатации

Страница: 8 / 44

Single Gas Analyzer (SGA)
Operations Manual
Super Systems Inc. Page 8 of 44 Page 8 of 51
2. Open the
nLocateIP
program.
Figure 1 - Opening nLocateIP program
3. Once the program opens, click the Search
button. The program will begin searching
for SSi devices connected to the network.
Figure 2 - Search button in nLocateIP
4. Look for identifying text in the list of
instruments. The corresponding IP address
is the IP address that you will want to use.
Once you have found the IP address, you should be able to complete any additional network
configuration using the web interface. See the
The Read/Write Registers page gives access to the underlying Modbus registers of the SGA.
This page is primarily intended for testing and troubleshooting purposes.
Please contact SSi before attempting to make any changes to the settings on this page.
Network Configuration section on page 30.