SSD Drives DIGIVEX Motion PVD 3554, Руководство пользователя и по вводу в эксплуатацию

Страница: 37 / 38

DIGIVEX Motion - PROFIBUS
35
PVD 3554 GB 01/2004
4.3.3 Adding DIGIVEX Motion to the hardware configuration
Continue by adding DIGIVEX Motion to the hardware configuration of your project as shown in
STEP7 software help.
Choosing the slots:
Three configurations are possible for the Input/Output slots:
PP01 This standard message is used to access the DIGIVEX Motion
parameters following the PKW mechanism (section 2.4) and the 2
process data (2 status words in input or 2 control words in output).
PP03 Only process data is exchanged. This configuration is used when no
other DIGIVEX Motion parameter is required by the PLC.
Standard telegram1 As for PP03, only process data is exchanged cyclically. DIGIVEX
Motion parameters can however be accessed through the DPV1-
Profidrive V3.0 mechanism for the PLC that can support this
functionality.
NB:
Addresses for the beginning and end of the Inputs/Outputs in the hardware configuration slots
must be adapted to the range supported by the CPU (usually < 256).