SRP aero Lynx VTOL, Руководство пользователя

Страница: 34 / 172

The GCS will automatically check if a firmware update is available upon connecting. If an update is available the GCS will open a
dialog which states that a firmware update is available. Please follow the insturctions in Firmware Update for instructions on how
to update the firmware.
Default Altitude - Set
The default altitude sets your mission altitude. The altitude is referenced as a height above ground from where the aircraft takes off from.
That location is known as home. M ission items will default to this altitude when planning a flight, except for takeoff and landing
transition. Individual mission items can be modified on the Plan Tab if they need to be higher or lower than the default altitude. At this
time, Lynx VTOL does not support terrain following.
Choosing the appropriate flight altitude for your mission is critical and dependent upon imagery resolution requirements, ground
coverage vs. time, terrain, obstacles, other air traffic, and local regulations.
Caution: Changing the default altitude does not affect any mission items that have already been planned. Items that have already
been planned must be individually edited or cleared.
Automated Parameter Checks
The GCS will automatically check that the autopilot parameters are correctly configured.
Caution: If any parameters fail the check please contact support@srp.aero. Do not fly.
Mission - Clear
The existing mission on the aircraft must be cleared before a new flight. Do this from the Plan Tab by selecting
Clear
⇨
Clear mission
on the aircraft
.
Preflight
34