27
Air Spring Installation
2 0 0 H o u r S e r v i c e
A i r S p r i n g I n s t a l l a t i o n
It is optional to change maximum fork travel by replacing the stock air spring shaft assembly with a shorter or longer air spring shaft assembly. If
maximum travel is increased or reduced, use the new complete air spring shaft assembly in the following installation steps. It may also be necessary
to add or remove Bottomless Tokens™. Refer to
Air Spring Travel Change and Bottomless Tokens
for details.
Refer to the RockShox® Spare Parts Catalog available at
www.sram.com/service
for the required spare part kits. For part ordering information, please
contact your local SRAM® distributor or dealer.
Apply a liberal amount of grease evenly around the end of a clean
plastic dowel, approximately 150 mm from one end. Use the dowel to
apply the grease to the inside surface of the upper tube, approximately
150 mm into the tube.
Install the top out bumper onto the shaft.
Apply a liberal amount of grease to the air spring shaft.
1
Dowel
2
3