Model SR575 Bariatric Stand-On Scale
Operating and Service Manual - S/N 1000+
Part No. MAN575_031105
Page 5 of 18
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
2003
S
Instruments, Inc.
ASSEMBLY Cont’d
STEP 7
: Attach the Display Cable Connector (8) to its mate in the Base Assembly. Slide the extra
cable back up into the mast pipe.
STEP 8
: Install the six (6) “D” cell batteries as indicated on the Battery Compartment Cover
label. Tightly close the cover.
STEP 9
: (Figure 3) Attach Leveling Feet (10) (separate package
provided) to each of the four (4) corners of the Base Assembly. Screw
the Leveling Feet approximately 1/2 inch into the hole of each of the four
(4) transducer cells.
Note
: Leveling feet must be in place to operate the
scale properly.
STEP 10
: Return the scale to the upright position. Adjust Leveling Feet
to ensure scale will sit level on the floor.
REPLACEMENT PARTS and ACCESSORIES
SYSTEM DESCRIPTION and INTENDED USE
SYSTEM DESCRIPTION
The SR575 Bariatric Stand-On Scale employs the latest in microprocessor and load cell technology
to provide accurate and repeatable weight data. Four (4) identically matched transducers are
strategically placed to ensure an accurate representation of the patient’s weight.
The low power microprocessor circuitry allows the SR575 to derive its power from six (6)
common “D” cell batteries, which will provide up to 10,000 weight readings before needing
replacement. This eliminates the need for an external battery charger or the danger of an AC
power supply cord on a portable scale.
The patient’s weight is displayed on a 16-character dot matrix LCD. With a push of a button, weight
data may be viewed in either
pounds or kilograms with a displayed resolution of 0.1 for each.
INTENDED USE
The SR575 Bariatric Stand-On Scale is specifically
designed for use as a portable patient weighing system
for ambulatory and non-ambulatory wheelchair bound
patients or those that need to be supported by a chair or
walker. Maximum weight capacity must not exceed
1000 pounds or 454 kilograms gross weight.
Figure 3: Leveling Feet
Installation
Part #
Description
1
ES7428
Display Label / Membrane Switch
2 MF2284T52
Leveling
Foot
WARNING
DO NOT EXCEED
MAXIMUM WEIGHT LIMIT OF
1000 LB / 454 KG
10