Storage for Recording
1.
Press OK to enter.
2.
Press the Up or Down buttons to select “SD Card” or “USB Device”.
3.
Press the OK button to confirm and exit.
Display Items
1.
Press OK to enter.
2.
Press the Up or Down buttons to select an item
3.
Click the OK button to confirm whether or not to display this item. If
the following items are enabled, the icons below will appear:
Signal intensity
SD/USB status: Shows SD/USB connection status
Camera: Camera name
4.
When you have selected the items you want to see, press the MENU
button to confirm and exit.
TV System
1.
Press OK to enter.
2.
Press Up or Down to select, then press OK to confirm and exit. Use PAL
for UK monitors.
System Information
1.
Press OK to enter and view the information.
2.
Press Menu to exit.
System Update
Please contact technical support for information on firmware availability and
installation instructions.
Scan Mode Period
1.
Press OK to enter.
2.
Press Left or Right to change the setting.
3.
Press OK to confirm and exit.
Mute
1.
Press OK to enter.
2.
Press Left or Right to set on or off.
3.
Press OK to confirm and exit.
Load Defaults
1.
Press OK to enter.
2.
Press Left or Right to select “Cancel” or “OK” – cancel makes no
changes, OK restores all of the device’s settings to their defaults.
3.
Press OK to confirm your selection and exit.
Brightness
1.
Press OK to enter.
2.
Press Left or Right to decrease or increase the brightness.
3.
Press OK to confirm and exit.
Volume
1.
Press OK to enter.
2.
Press Left or Right to decrease or increase the speaker volume.
3.
Press OK to confirm and exit.
