Specifications
1DVRDIG502
1DVRDIG1502
Camer
a
Imaging Sensor
1/5 inch colour CMOS
Video Resolution
656 x 488
Power Supply
5V DC
Viewing Angle
50
°
50
°
Consumption Current (Max.)
400mA
600mA
Waterproof Capacity
IP54
IP66
Night Vision Distance
5m (Max.)
15m (Max.)
Dimensions (W x D x H)
132 x 64 x 57mm
(exc bracket)
164 x 81 x 172mm
(inc bracket)
Approx. Weight
300g
615g
Monitor
LCD Screen Type
7"TFT LCD
LCD Screen Resolution
800 x 480
SD Card
Supports up to 32GB
Hard Disk
Supports up to 1TB
Video Frame Rate (Max.)
30fps
Video Resolution
CIF/VGA
Video Format
AVI
Date Output
USB 2.0
Power Supply
5V DC
Consumption Current (Max.)
700mA
Dimensions (W x D x H)
214 x 157 x 26 mm
Approx. Weight
510g
Unobstructed Effective Range
200m
Operating Temperature
-10
°
C - +50
°
C
Operating Humidity
15 - 85% RH
Warnings
This product should not be exposed to water unless otherwise stated.
Turn off the product if it is not in use.
Do not attempt to use any other power sources for this product other
than those provided.
Frequently Asked Questions
“Why doesn’t the screen display an image from my camera after it is paired?”
Please ensure the camera channel is set to “Active”, see page 18.
“No Signal” could indicate that the camera is out of range.
“No Video” indicates that the monitor is detecting a signal from the
camera, but it is not strong enough to display an image.
“The screen looks scratched/scuffed, but it is brand new out of the box!”
There is a plastic film attached to the front of the screen to protect it
from damage in transit. This can be peeled off to reveal a pristine
screen.
“I can hear a rough sound from the microphone but nobody is around”
The microphone is very sensitive and often picks up atmospheric noise
like wind. Turn down the volume on the monitor.
“Motion detection keeps recording, but nobody is there”
Motion detection looks for movement from any source. Please ensure
there are no trees blowing in the wind or other movement.
High sensitivity levels can create ‘false positives’, try reducing the
sensitivity level.
“The PIR did not detect someone moving past”
The PIR has a maximum range of 5m on both the 5m and 15m night
vision camera models. In warm weather the range can be reduced.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following conditions:
This device may not cause harmful interference
This device must accept any interference received, including
interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
