Structure
Installation
1.
Install the camera at the desired location. The camera can be installed
in one of 2 ways:
2.
Connect the receiver at a central location if using multiple cameras, or
in the case of a single camera setup connect it as close to the camera as
possible.
3.
Insert the SD card or connect an external storage device. In the case of
USB hard drives, please ensure you are using an external power supply
(not a USB powered disk).
Notes:
1.
The monitor does not support ‘hot plugging’ of storage devices / SD
Cards. When you connect a new device, please reboot the monitor by
shutting it down and booting up again.
2.
The format used by the device is FAT32. Please ensure your devices are
formatted appropriately.
3.
Please ensure any connected storage devices are reformatted in the
monitor if they have been used with other devices.
