SPX PEARPOINT P350, Руководство по эксплуатации

Страница: 14 / 88

4 P350 flexitrax Operation Manual
2.2 Cable drums
The system supports either a powered or manual drum
that can accommodate cable lengths of 100m (330’),
150m (495’) or 250m (820’). The powered drum contains
an integral power supply whilst the manual drum requires
an external power supply unit.
The cable drum cassette in the powered drum is
user-replaceable. Please refer to Appendix 9.5 for
instructions on how to remove and install the cable
drum cassette.
Optional lengths of cable are also available for both the
powered and manual drums. Please refer to Appendix 9.5
for instructions on how to remove and install the cable.
Please visit
www.radiodetection.com
for a complete list
of spares and accessories.
2.2.1 Powered drum
Command module support stand.
On/Off switch. Switches the system on or off.
Command module.
Reel compartment: Houses up to 250m (820’) of
cable wound onto the drum cassette.
Removable handle, handle bars and wheels:
Allow you to manoeuvre the system easily into
position.
Emergency stop: Instantly shuts off system
power. When initiated, the system must be reset.
Pendant connector: For connecting the optional
pendant controller.
Command module connector: To connect the
command module link cable.
BNC Video Jacks: Provide secondary input and
output options for external composite video
equipment.
Power supply socket: To connect mains power.
Fuse holder: 5x20mm T12A 250V cartridge fuse.
Crank handle: Will allow the manual retrieval of
the deployed cable. (Not shown).
Optional vehicle mounting rails: To secure the
system in your van. (Not shown).
Cable rollers.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
2.2.2 Manual drum
Cable drum: Houses up to 250m (820’) of cable.
Cable brake.
Crawler connection terminal (Not shown).
Crank handle socket.
Command module support clamp.
PSU link cable socket.
Manual layering handle: To assist with laying cable
evenly on the drum.
Cable rollers.
2.2.3 External PSU (manual system only)
On/Off switch. Switches the system on or off.
Emergency stop: Instantly shuts down the system
power. When initiated, the system must be reset.
Pendant connector: To connect the optional
pendant controller.
Command module connector: To connect the
command module link cable.
BNC Video Jacks: Provide secondary input and
output options for external composite video
equipment.
Power supply socket: To connect mains power.
Fuse holder: 5x20mm T12A 250V cartridge fuse.
Link cable connection for manual drum.
2.2.4 Link cables
Command module link cable.
Manual drum link cable.
15.
16.
17.
18.
19.
20.
21.
22.
2.
6.
7.
8.
9.
10.
11.
23.
24.
25.