23
SPECIAL CASE: MULTIPLE TRIGGERS WITH SPRAY OVERLAP
Occurs if the system receives multiple start events (rising edge of trigger signal) before a spray cycle is finished. If the
time delay between two successive start events (or trigger pulses) is lower than the spray time, then there is an
overlap of two successive spray pulses.
FIXED SPRAY TIME–
WITH REPEAT SPRAY
This timing mode is used to create a continuous repetition of spray period for a fixed time.
Special Case:
Repeat Spray, Air Overlap: If repeat off
-
time <= (antic follower time), the air will remain on.
Note:
This can happen in both fixed and Variable spray times.
Multiple Triggers with Spray Overlap
Repeat Spray
Repeat spray, air overlap
