9
9
TERMINAL BLOCK J2 AND J5 EXAMPLE DIAGRAM
Block J2 provides 24 VDC only and Block J5 is ground only.
This provides the option to power components such as proximity sensors or pressure switches. If your system
configuration does not require or necessitate the use of external components, Blocks J2 and J5 will likely go unused.
Figure 4.3
-
3: Example diagram for connecting external pressure transducers
(or any other components) to the system
TERMINAL BLOCK J1
Terminal Block J1 is used to provide power to the spray control panel via the connector.
Figure 4.3
-
2: Location and connector for Terminal Block J1.
