SportsArt Fitness G862, Руководство пользователя

Страница: 31 / 42

30
9. MAINTENANCE
Maintenance topics are presented below in the following order: error
messages, lubrication of the shoulder area, lubrication of the stride area,
glide rail cleaning, maintenance schedule, task list, one-year maintenance
log, and electronics block diagram.
MAINTENANCE Error Messages
The following messages can appear on this product for diagnostic purposes.
ERR7 - Indication: The stride mechanism is not calibrated properly. Contact
a certified SportsArt technician. The technician will need to either calibrate
or replace the stride mechanism.
- - - (Three flashing lines) - Indication: The unit is entering energy saving
mode. The main display will shut off, and keys will remain lit. To reactivate
the unit, press a key or exercise on it.
NOT GRID -
Indication: The unit is in resistor mode.Alternator output is
limited to 100W. If the resistor gets too hot, alternator output is further limited
to 50W. When the resistor cools, alternator output recovers to 100W.
ERR1 - Indication: The inverter is overloaded. This message can appear in
exercise mode once every 30 seconds.
ERR2 - Indication: The large resistor is too hot. The unit cannot be operated.
ERR4 - Indication: Failure of the large resistor. The unit cannot be operated.
MAINTENANCE Lubricate the Shoulder Area
Follow steps (a) through (d) to lubricate the shoulder area.
(a) Remove the cap over the lubrication access area.
(b) Use a grease gun to apply red lithium bearing grease into the zerk fitting
on the product.
(c) After applying lubricant, remove the grease gun.
(d) Insert the cap back into place.