SPORTS ART T655M, Руководство пользователя

Страница: 13 / 60

12
(b)
(c)
(e)
(d)
(a)
STEP 1 Install the Pedestals and Handlebar Assy (Cont.)
Follow steps (a~e) in order to thread the data cable into the right pedestal.
(a) First, remove the zip tie on the cable in the right pedestal mount, and then
stretch the cable out as shown.
(Note: make sure the cable is fully pull out of the oval opening from the
pedestal mount.)
(b) Place the right pedestal (A3) on the floor, with the lower hole facing the
data cable. Disconnect the feeder cord (A4) from the bottom of the
pedestal. Wrap this feeder cord (A4) around the top of the data cable to
secure them together.
(c) Disconnect the feeder cord (A4) at the top of the right pedestal (A3).
(d) Pull the feeder cord (A4) to thread the data cable through the right
pedestal (A3).
(e) Once the data cable has been threaded through the pedestal, disconnect
the feeder cord (A4) from the data cable.