8
OPERATING INSTRUCTIONS
1. FUNCTIONS:
1) 300 laps and split times to 1/100 second
2) 12/24-hour time format
3) time and date display, chrono data, stores data for each run with marker
4) Shows fastest lap, slowest lap and average lap time
5) Countdown timer for up to 10 hours
6) Pacemaker function with adjustable interval, frequency from 10-320 cycles per
minute
7) Measures the number of strokes per minute for sports such as swimming and rowing.
8) In the number of strokes, a sequence from the start to the end of the race will be
recorded as a Data block recorded. A sequence of data that is recorded from the start
to the end of the race is recorded as a „BLK“ data group. Up to 100 Data blocks can
be stored without deleting other data
I have to.
9) CR2032 lithium battery with battery cover for easy battery replacement.
10) Cord included in scope of delivery
11) Low Battery Level Indicator
12) Waterproof
2. ASSIGNMENT OF THE KEYS
[A] START/STOP
[B] ZERO / ROUND, INTERIM
[C] CHECK.
[D] MODE
USER MANUAL
1. switch between operating modes
To switch between operating modes, press the [D] button in the following order:
Time/calendar → Alarm → Stopwatch 1 → Stopwatch 2 → Count-
down → Pacemaker → Beat number
2. „Time/Calendar“ Operation and Settings
In „Time/Calendar“ mode, press the [C] button for 2 seconds,
to access the [Time/Calendar] settings. The „Year
starts flashing. Then press the [B] button repeatedly to
successively „year - month - day - 12-/24-hour - hour - minute
- Second“. When the display blinks, press [A],
to add „1“, press and hold this button to fast forward.
When you have finished the settings, press the [C] key.
button to exit the settings.
3. alarm settings
In the „Time/Calendar“ mode, press the [D] key to set the
„Alarm“ mode. Then press and hold the [C] key.
button for 2 seconds to access the alarm settings.
The „hour“ starts flashing. Then press the [B] button.
several times to display „hour - minute“ one after the other. Press
If you [A] to add „1“, press and hold this button for the
Run fast. When you have finished the settings, press
Press the [C] button to exit the alarm setting. If you
are in „Alarm“ mode, press the [A] button to turn the alarm function on/off. The „on“ display means that the
alarm is active, „-“ means the alarm is switched off. When the set time comes, the alarm sounds for 15 seconds.
You can cancel the alarm by pressing any key.
Manual
for Product code 289206
