10
„COUNTDOWN[ MODE
1. countdown time
Press the [D] button to go to the „Count-down“
screen mode. Then press and hold
Press the [C] button for 2 seconds to move to the
setting to get there.
The countdown hour starts flashing.
Then press the [B] button to select „Hour-
Minute-Second“. If a number flashes, press the
[A] button to select „1“
to add. Press and hold the fast key. Press the [C]
button to select the Exit settings. When you have finished the settings, the middle line (current countdown time) is set to the
upper row (planned countdown time) is updated. If the scheduled countdown time is „0“, the current countdown starts.
Time with countdown from 9:59:59.
2. countdown
In „Countdown Time“ mode, press the [A] button to start or stop the countdown. The bottom line (Countdown
Repeats) shows „1“, if the scheduled countdown time has expired once, a „Di-Di“ sounds. Then
the countdown is restarted. The „Countdown“ mode is stopped and the countdown repetitions show „0“,
after the countdown reruns have reached 9999. During a pause in the „Countdown“ mode, press the
B] Button to reset the countdown and clear all countdown repetitions.
„PACEMAKER“ MODE
1. set pacemaker
If you are in „Time“ mode, press the [D] button to move to the „Time“
mode.
„pacemaker“ mode. The frequency flashes. Press the B] Button to select
the frequency in the following order: 10 → 20 → 30 → 40 → 60 → 80 →
120 → 160 → 160 → 240 → 320. Pacemaker
2. execute „pacemaker“ mode
When you have set the desired frequency, press [A] button to start or stop the pacemaker. In the „pacemaker“ mode, every
minute a „Di“ signal sounds and the Frequency number is „1“ according to the selected frequency. The maximum frequency is
9999. The pacemaker will be
will be stopped and reset and all frequency numbers will be deleted when the frequency number reaches 9999. During
of a pause of the pacemaker, press key [B] to
reset the pacemaker and to enter the frequency
number.
Delete After resetting, press [B] to reset the fre-
quency again.
The number of strokes/frequency of an activity
per minute is calculated automatically by set-
ting thetime required for three strokes is calcu-
lated.
is. The measurable number of strokes
per minute is between 10 and 180. For example:
F-10 means that the signal in
60 seconds 10 times. This means that it
takes six seconds to the next signal.
F-80 means that in 60 seconds, the signal will be
Eighty times, every 0.75 seconds.
Manual
for Product code 289206
