9
„CHRONOGRAPH“ MODE
1. stopwatch settings
„Stopwatch 1“ and „Stopwatch 2“ have the same running time
only the third line is different.
The third line of „Stopwatch 1“ shows the currently accumulated
In the meantime.
The third line of „Stopwatch 2“ shows the currently accumu-
lated
Lap time. (The third line shows „L“ and „LAP“ symbols like
shown on the right.)
When you are in the chronograph, press the [A] button,
to start or stop „CHRONO“.
- When the stopwatch is running, press the [B] button to
record the time for each round.
- When the stopwatch is paused, press the [B] button, to
reset them and restore the previous recordings as a data
group.
- When the stopwatch is reset (all displays are set to zero),
„MEM“ (Memory) will appear and show the remaining
Memory space.
- When the stopwatch is running or paused, „MEM“ does not appear and the display shows the current number of laps.
- When the memory is full, it will not be able to record new data. The „Memory Number“ flashes to remind you that data from
the memory must be deleted.
2. recall stored data
A sequence of data that is stored from the start to the end
of the race, is called the „BLK“ data group.
are recorded. Up to 100 data blocks can be stored.
without other data having to be deleted.
When the stopwatch is running, stopped or reset,
press the [C] button to enter the „Polling“ mode.
(if no memory is available, nothing can be stored
can be retrieved). Then, as shown in the figure above
„RECALL“ is shown. Press the [C] button to display the data
of any „storage group“. Press and hold the fast key. „BLK-001 → BLK-002 → BLK-003...“
When you recall the required data group, press the [A] button to access the data. Press repeatedly
the [A] button to select the fastest (FS), slowest (SL) and average (AV) time as well as each storage time of this storage group.
to retrieve. Press and hold the Speed button. When you have finished memory recall of a group, press
Press the [C] button to return to the „BLK“ group number. Repeat the above steps to return to the data of a group number.
to the other group. Press the [D] button to return to the „Chronograph“ mode at any time.
3. delete stored data
If at any time during the memory recall you want to
Press the [B] button, the „Clear all data“ screen appears.
) with a warning tone „Di-Di“. If you press the [B] button for 3
seconds and the warning tone will sound a long „Diiii“.
all the data is deleted and you return to the
„Chronograph“ mode. If you do not press the button
the display returns to the memory recall mode and the
Erasing the memory is canceled. Please note: Please
confirm that the „Chronograph“ mode is stopped and reset before deleting the memories.
Manual
for Product code 289206
