11
„BEAT“ MODE
1. calculation
In „Time“ mode, press the [D] button to enter „Beat Number“ mode. When you are in „Beat Number“ mode,
Press the [A] key to start the count-up of the current time. The current beat number is „180“. After one second
the countdown from „180“ begins. During the countdown, press the [A] key once three beats have been completed and press the
„S“ key.
the current number of beats is displayed. Press the [A] button again at the same time to start the beat number and return to the
previous beat number.
automatically save the number of beats. When the beat number is stopped, press the [B] button to reset and then press the [OK]
button to save the beat number.
automatically save the previous „current beat“. Up to 10 data can be stored. If more than 10
measurements are made, the oldest data is deleted from the memory.
The display „-“ means that there are no beat records.
Hints: When the „Beat Number“ mode is started, „180“ is displayed for one second first. If during this
If the [A] key is pressed immediately for 1 second, the calculation is stopped immediately and „Error“ is displayed, which means
that the
the recall has failed. If the countdown begins with „180“ and is reached until „10“, pressing the key stops.
A] the calculation immediately and „ERROR“ is displayed, which means that the retrieval has failed.
2. recall and delete
When the calculation is stopped, press [A] to recall the previous beat and „RECALL“ is displayed.
After recalling a memory group, it will be ready for recall. If you press the [B] button during recall,
Clear all data“ appears in the display together with the warning tone „Di-Di“. All beats are
will be cleared after 3 seconds unless the [B] button is held for less than 3 seconds: Then the stored
Data not deleted.
Manual
for Product code 289206
