SPM Ice Dream 1, Руководство оператора

Страница: 48 / 124

Data di emissione: Aprile, 2011 Revisione: 1 Pag. : 48/124
- Empty the bowl of any remaining product.
- After unlocking the main cover with its key,
remove it.
- Fill the bowl with hot water (not boiling) to
help melt off any sugar residuals and drain this
water before proceeding with the next step.
Caution
To avoid electrical shock or contact with
moving parts, before proceeding with the
disassembling operations, make sure all
switches are in “OFF” position and that the
main power supply is disconnected.
- Pull out the upper mixing device (O) by
pushing it slightly backwards, to remove it from
its fixed position (see figure 13).
- Unscrew and slip off the knobs (P) then lower
the bowl (A) to eliminate any product residue
through the dispensing tap (I) (see fig. 14).
- Pull the tank outwards, as shown in the figure,
and remove it fully from its seating (see figure
15).
Fig. 13
Fig. 14
Fig. 15