DrumXchanger Analog Code
®
Plug-in
25
Rim
The red arrow on the right side of the LEVEL trigger meter deter-
mines the level from which an additional rim shot sound is to be
played back. Use the RIM control to set the rim shot volume in rela-
tion to the drum sample.
All SPL Kits include rim shot sounds for all snare and toms multi-
samples.
Phase
This button reverses the polarity of the sample signal. If there were
any phase cancellation problems with the original signal while
using a sample, use this function to correct them. These cases
ought to be very rare, so always choose the setting that sounds
better.
Delay
The DrumXchanger always matches the original and sampled
drum hits automatically. However, the possibility of a delay is
always present (if the sample was not cleanly edited, for example).
A decrease in low-end power or the appearance of flams (double
hits) are typical signs of a mismatch between the original and the
sampled signal. Use the DELAY control to correct these problems.
The delay time ranges from +3.5 ms to -3.5 ms.
SAMPLE Module
Control Elements
