18
Crimson
Content
Phones 1 and Phones 2
Use the Phones 1 and Phones 2 jacks on the front panel to connect your headphones.
You can connect all types of headphones with impedances from 20 to 600 ohm. This wide
range entails big volume differences between low and high impedance headphones. In
order to keep low impedance headphones under good control, we use a comparatively
high impedance of 33 ohms at the output.
Specifications:
1/4" stereo jacks (TRS)
(Sleeve=Ground, Tip=left channel, Ring=right channel)
Output impedance: 33 ohms
Frequency Response: 10Hz - > 200 kHz
IMPORTANT:
When connecting headphones, make sure that
the plug is fully inserted.
Power at 0 dBu:
47 ohms load: 13 mW
300 ohms load: 1.7 mW
600 ohms load: 1.0 mW
Max. Power:
47 ohms load: 670 mW
300 ohms load: 265 mW
600 ohms load: 150 mW
THD+N Ratio (at 1 kHz, Power at 0 dBu):
47 ohms : 0.0026%
300 & 600 ohms : 0.002%
Connections
