32
Crimson
Content
48 V
Use the 48 V switch above the Mic Gain knob to activate phantom power. Condenser
microphones need phantom power to drive their integrated preamp. We recommend to
disengage the phantom power for all types of microphones.
• First connect the microphone to the Crimson and then engage the 48 V switch.
• Before you remove the microphone disengage the 48 V switch and then wait at least
ten seconds.
A microphone with an unbalanced output should only be used without phantom power!
High-Pass Filter ( )
The high-pass filter filters out impact noise, rumble and other unwanted noises below
75 Hz. This first order filter has a 6 dB slope per octave.
Control Elements
