background image

 12

 

 
 
 
 

 

 
 
 
 
 
 
 

 

FUNCTIONS 

 

COMPUTER OPERATION INSTRUCTIONS

 

 

 

 
 
 

Display view

Dot matrix 

Program buttons

Heart rate indicator 

Fan 

Heart rate bar graph  

Fan power switch 

Message window 

Control keys

Display view

Power on 

The Upright has a built-in generator for power and do not need to be plugged into an AC outlet. To power up the 
Upright simply start to pedal, the console will turn on automatically. If the console does not light when you pedal, 
check that the power switch is set to 0 (Generator). The switch is located on the front, lower left side of the main 
plastic cover. There is an optional AC power transformer that is available through your dealer or direct from 
Spirit. The AC power transformer would be used if the Upright will be operated at very low speeds. In this 
scenario the power to the electronic console will be too low to maintain the display. To use the AC power 
transformer, plug it into an AC outlet and the power input module of the Upright and set the power switch to 1 
(AC power input). 
 
When initially powered on the console will perform an internal self-test. During this time all the lights will turn 
on for a short time. When the lights go off the dot matrix display will show a software version (i.e. VER 1.0) and 
the message window will display an odometer reading. The odometer reading displays how many hours the 
Upright has been used and how many virtual miles the Upright has gone. The display shows: ODO 123 MI 123 
HRS.  
The odometer will remain displayed for only a few seconds then the console will go to the start up display. The 
dot matrix display will be scrolling through the different profiles, showing the programs, and the message 
window will be scrolling the start up message. You may now begin to use the console.  
 

Содержание XU875-A27






























Отзывы: