Spirit CS800, Руководство пользователя

Страница: 13 / 48

11
www.spiritfitness.com
CS800
STEP TWO
HARDWARE FOR STEP 2
PART TYPE DESCRIPTION QTY
75 HEX HEAD BOLT 3/8” x 3/4” 6
76 BUTTON HEAD SOCKET BOLT 3/8” x 16 x 2” 2
77 HEX HEAD BOLT 3/8 x 2-14” 4
93 NYLOC NUT 3/8” x 7T 4
100 FLAT WASHER 3/8” x 19”1.5T 4
106 CURVED WASHER 3/8” x 23 x 2.0T 8
1. Place Upper Left Handlebar (No.15) (with orientation
of 90-degree bend at front) onto Connecting Plate
welded to the Console Mast (No.2) and secure
it with a Hex Head Bolt (No.75) and a Curved
Washer (No.106) to the Connecting plate (do not
tighten completely). Then insert one of Handlebar
Connecting Tube (No.10) to connect with Upper Left
Handlebar (No.15) at the 107-degree-bending end
and temporarily with two Button Head Socket Bolts
(No.75) with L Allen Wrench-M6 (No.120) . Then
attach the bottom end of Handlebar Connecting
Tube (No.10) to the U-shape mounting at left side of
Rear Stabilizer with Handle (No.11) . Use two Hex
Head Bolts (No.77) together with two Flat Washers
(No.100) , two Curved Washers (No.106) and two
Nyloc Nuts (No.93) to tighten by using Wrench
(No.116) and Wrench (No.117). Tighten and secure
all other bolts.