Customer Service 1-888-707-1880
Dyaco Canada Inc. 2021
Email: [email protected]
14
2
SIDE TUBE
ASSEMBLY
HARDWARE
STEP 2
1. Take off the axle & screw from the Right Driving Assembly
(No.19), install the lower hole of Right Driving Assembly to the
axle of Connecting Arm (R)(#8) to connect together, then firmly
fasten one Hex Head Bolt (No.88) through one Flat Washer
(No.121) using the Wrench (No.136).
2. Install into the upper hole of the Right Driving Assembly to
lower U-shaped plate of Handgrip Stabilizer Assembly (No.11),
then insert the Axle into the upper hole through the lower
U-shaped plate, firmly fasten with the previously removed
screw using the Wrench (No.136). Repeat for the left side.
3. Install the Mast Handlebar Assembly (No.14) onto the Console
Mast (No.2). Secure with 2 Hex Head Bolts (No.90), 2 Curved
Washers (No.125) using the Wrench (No.135).
#88.
5/16"×15mm_
Hex Head Bolt (2pcs)
#121.
Ø5/16" × Ø23 ×
1.5T_Flat Washer
(2 pcs)
#90.
3/8" × 3/4"_
Hex Head Bolt (2 pcs)
#125.
3/8"×23×2.0T_
Curved Washer (2pcs)