SPINNER® BL ADE AND SPINNER® BL ADE ION
OWNER’S MANUAL
www.spinning.com 800.847.SPIN (7746)
15
CARING FOR YOUR SPINNER
®
BIKE
MOVING YOUR BIKE
Stand in front of the bike, grasp the handlebars and tip the bike toward
you until the transportation wheels are touching the floor. Roll the bike to
the desired location, then gently lower the rear of the bike back to
the floor.
LEVELING YOUR BIKE
The leveling feet are located on each corner of the front and rear
stabilizer bars. It is important that all four of the leveling feet touch the
ground to keep the bike stable at all times. To adjust, turn the leveling feet
counterclockwise to decrease the height or clockwise to increase the
height until the bike is stable.
ADJUSTING AND LEVELING YOUR SADDLE
If you experience saddle discomfort while riding or sitting on your bike,
the angle can be adjusted by loosening the 13 mm nuts located under the
saddle. Be sure to re-tighten the nuts after making your angle adjustment
and before riding your bike.
PREVENTING RUST
After each use, raise the handlebar post and seat post to the highest
settings to allow any moisture to evaporate. Using an absorbent cloth,
wipe all areas where moisture can settle.
PROTECTING YOUR SPINNER
®
BIKE’S FINISH
After each ride, protect your bike’s finish by wiping it down with a damp
cloth. We recommend using bike cleaners such as SPINTECH® Fitness
Equipment Polish. Do not use de-greasers. When cleaning your bike,
immobilize the flywheel by turning the resistance knob clockwise.
Always spray the cleaner onto the cloth and then wipe the bike down.
PEDALS
Check the pedals weekly to ensure that the threads are completely
tightened. If the pedals have become loose, tighten the threads with the
supplied pedal wrench to ensure that they are securely attached.
