background image

© 2021 Mad Dogg Athletics, Inc. All rights reserved.

6

21.  Before every ride please examine brake pad, pedals and drivetrain for 

signs of wear. The brake pad is a normal wear item and may need to 
be replaced over time.

22.  This bike is not suitable for therapeutic use and is for consumer use 

only. Consult a physician prior to starting any exercise program.

23.  The safety level of the bike can be maintained only if it is examined 

regularly for damage and wear (e.g. brake pad, saddle, pedals, 
drivetrain, etc).

24.  Replace defective or worn components immediately and/or refrain 

from using the bike until it is serviced or repaired.

25.  Special attention must be paid to all wear components (e.g. brake pads, etc.).
26.  Please adjust the handlebar and seat to your best biomechanical 

positioning. Incorrect form and/or excessive training may result in injury.

27.  Turn the resistance knob counter-clockwise to release the brake 

before exercising.

TOOLS INCLUDED FOR SPINNER

®

 BIKE ASSEMBLY

Use the included tools for bike assembly only.

Blade/Blade ION

14mm Crank Bolt

14mm Socket Wrench for Crank Assembly

(Tools and Hardware)

BIKE INFORMATION AND SPECIFICATIONS

SPINNER BLADE AND BLADE ION- 123.5 Lbs  (56 Kg)

ASSEMBLED SIZE:  1145mm Long x 502mm Wide x 1425mm Tall (avg, without tablet installed)

WARNING LABEL LOCATION

Read and properly follow all 

warnings and instructions prior 

to using the bike. Improper use, 

misuse and uncontrolled pedals 

can result in serious injury. 

1. As with all exercise equipment or 

programs, consult a physician prior 

to use and stop if you feel faint, dizzy 

or exhausted.

 

2. Keep children and pets away from 

the bike at all times.

3. Install the bike with a minumum of 

39” (1m) of unubstructed space on all 

sides and on a level surface.

4. Always ride in control. To stop, 

reduce your pedal speed in a 

controlled way.

5. To stop quickly, push down on the 

resistance knob to activate the brake.

6. This bike does not free-wheel. 

Pedals will continue to spin. Use 

caution when slowing and stopping.

7. Keep body parts and clothing free 

and clear of all moving parts.

10. Maximum user capacity is limited 

to 350 lbs. (159.1 kgs).

13. This product is not intended for 

theraputic or commercial use.

15. Replace this label if damaged, 

illegible or removed.

12. Lock the equipment and set the 

resistance to maximum when the 

bike is not in use.

14. The exercise bicycle should only 

be used after a thorough reviw of the 

operation manual (consumer 

exercise bicycles).

11. Spinning pedals can cause injury.

8. Ensure that all adjustments and 

locking features are properly secured 

before using the bike.

9. Inspect the bike prior to riding and 

replace worn, loose or damaged 

parts prior to use.

Содержание SPINNER BLADE

























Отзывы: