background image

SPINNER® BL ADE AND SPINNER® BL ADE ION  

OWNER’S MANUAL

www.spinning.com   800.847.SPIN (7746)

5

6.  This bike does not free-wheel. Pedals will continue to spin. Use caution 

when slowing and stopping. In an emergency, stop pedaling and push 
the resistnace knob down as an emergency brake to stop the pedals and 
flywheel from rotating. Uncontrolled spinning pedals can cause injury.

7.  If you experience dizziness, nausea, chest pains or any other 

symptom while using this bike STOP exercising and SEEK MEDICAL 
ATTENTION IMMEDIATELY. 

8.  Install and ride the bike on a mat that is placed on a level, solid surface 

and that has a minimum of 1 meter (39.4”) of unobstructed space around 
it on all sides. Adjust the stabilizer feet to make the bike level, secure and 
stable on all four feet at the same time.

9.  Keep hands well away from any of the moving parts.
10.  Wear clothing suitable for riding. Do not wear loose or baggy clothing that 

might get caught up in the parts of the bike. Always wear cycling shoes or 
athletic shoes with laces tucked in when using the bike.

11.  This bike must only be used for the purposes described in this manual. 

DO NOT use accessories that are not recommended by Spinning

®

.

12.  Differently abled people should not use the bike without the assistance 

of a qualified person or a doctor.  This is not a medical device and 
should be used with caution.

13.  Do not use the bike if it is not working correctly.
14.  Review all warning labels affixed to the bike and replace any label 

that is damaged, illegible, or removed. Contact customer service at 
Spinning.com for replacements.

15.  Functional and visual inspections of the bike should be made before 

the bike assembly is complete and prior to any ride.

16.  Do not exceed the MAX/STOP mark when adjusting the handlebar 

post or seat post.

17. Spinning

®

 pedals can cause injury. Pedal speed should be reduced in a 

controlled manner.

18.  Before using the bike, thoroughly inspect the bike for proper assembly.
19.  User must adjust the seat and handlebars to suit the user’s dimensional 

requirements. When adjusting, please insure that the bike is stable 
and that the resistance knob is turned to clockwise to immobilize the 
flywheel. Thoroughly tighen the corresponding adjustment knobs to 
insure that the seat and handlebars are secure before riding.

20.  This bike should only be used for home (consumer) use and is not 

meant for commercial use.

Содержание SPINNER BLADE

























Отзывы: