SPIERINGS SK597-AT4, Руководство пользователя, Страница: 138 / 256

SK597-AT4
Driving
Truck
4-48 SPIERINGS MOBILE CRANES USER MANUAL V 1.2
M
ei
2
0
1
8
C
h
a
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
8
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
4.13.5.2. Steering program: Manual
With this steering program, the position of the rear axle can manually be adjusted ( Picture 4-19 ).
Activating steering program
Enable steering program manual by using the key on the control panel steering system :
- The red indicator above the key becomes active when the steering program can be carried out
successfully;
- When enabling the program, axle 3 will be retracted.
The buzzer becomes active when the vehicle is ready;
- After enabling the off-the-road mode, the maximum vehicle speed is limited to 15 kph (9.4 mph).
Using steering program
Axles 1 and 2 are mechanically steered by the steering wheel, axle 4 can independently be adjusted.
Use the plus- and minus key on the control panel steering system to adjust the steering position of the
rear axle:
- The movement of the rear axle is executed immediately.
Examples
The display control panel steering system shows the current steering position of the rear axle.
In combination with the chosen steering program, the current steering position of the vehicle can be
determined ( Table 4-6 ).
However, this is just an indication. The real situation may be different.
Message Description
The steering position of the rear axle is in straight forward position.
The steering position of the rear axle is slightly to the right.
The steering position of the rear axle is maximum to the left.
Picture 4-19
Table 4-6