Spengler ES-60, Инструкция по эксплуатации

Страница: 27 / 116

FR
EN
ES
IT
DE
NL
AR
27
8. ERROR MESSAGES/MALFUNCTIONS
If an error occurs during a measurement, the measurement is discontinued and
a corresponding error code is displayed.
Error No. Possible causes
ERR 1
• The systolic pressure was determined but afterwards the
cuff pressure fell below 20 mmHg.
• The tube may have become unplugged after the systolic
blood pressure was measured.
• No pulse could be detected
ERR 2
• Unnatural pressure impulses impair the measurement
result.
• Possible cause: the arm was moved during the measurement
(artefact).
ERR 3 • Inflation of the cuff takes too long. The cuff is not correctly
placed or the cuff connection is not sealed.
ERR 5
• The measured readings indicated an unacceptable
difference between systolic and diastolic pressures. Take
other reading following directions carefully.
ERR 6
• Single data differ too much during an Average Mode
reading even after 4 cycles. No average result can be
displayed.
ERR 7
• When «ERR 7» appears, the device is put automatically in
«TEST» mode
If problems occur when using the device, the following points should be checked
and if necessary, the corresponding measures are to be taken: