Spelsberg Wallbox Pure, Руководство по эксплуатации продукта

Страница: 7 / 40

7
Quantity Description
1 Charging cable with type 2 plug
1 Design cover
5 Disc for unlocking the design cover
3 RFID chip
4 Truss head screw 6x60
4 Wall plug UX 8 x 50 R
3 Double membrane seal cable entry DMS M16
1 Double membrane seal cable entry DMS M25
1 Double membrane seal cable entry DMS M32
3 Setup QR code for commissioning by app
1 Quick Start Guide
1 Installation Guide
6. Accessories
Description Order number
Polar RFID chip 591 813 01
Graphite RFID chip 591 814 01
Other accessories can be found on the Spelsberg website.
7. Technical description
The wallbox provides the AC voltage for single-phase or three-phase charging of electric vehicles (charging
mode 3, connection case C according to IEC 61851). As soon as the charging cable is connected to the electric
vehicle, the charging process can begin.
Note
State D (ventilation) is not supported.
Depending on the setting in the wallbox, charging may have to be authorised by the user before it begins.
After charging, the permanently connected charging cable can be stored using the cable management of the
wallbox. The protective cap prevents moisture from entering the charging plug.
A status LED and a buzzer signal the states of the wallbox and the charging process.
The wallbox switches off the voltage in the following situations:
„
DC fault currents above 6 mA
„
Excessive temperature
„
Overload (Smart Pro only)
„
Overvoltage / undervoltage (Smart Pro only)
The Spelsberg wallbox app helps the installer to configure the wallbox and offers the operator and users a
variety of functions for controlling the wallbox and analysing the charging processes:
„
Charging electric vehicles by providing the AC voltage
„
Registration of RFID chips
„
Communication with the vehicle as per ISO-15118 (Plug & Charge, Smart Pro wallbox only)
„
Intelligent load management for operation in a charging network (Smart Pro wallbox only)
„
Integration into energy management systems (Smart Pro wallbox only)
„
Integration into photovoltaic (PV) charging systems (Smart Pro wallbox only)
„
Evaluation of charging processes (Smart Pro wallbox only)