Spelsberg Wallbox Pure, Руководство по эксплуатации продукта

Страница: 29 / 40

29
The Spelsberg Wallbox App is available for Android and iOS from the respective stores (see “10.1. Installing
the Spelsberg wallbox app”, page 20).
11.4.1. Configuring charging authorisations
Authorisations can be set up and managed using the Spelsberg wallbox app. If you do not want to allow un-
restricted use of the wallbox, you can create authorisations for vehicles and RFID chips.
►
Select the menu item “System”
→
“Authorisations”.
►
Follow the instructions in the app.
11.4.2. Teaching RFID chips
RFID chips must be taught before they can be used for authorisation at the wallbox. Multiple RFID chips can
be created. The charging statistics for each RFID chip can be viewed in the app.
To set them up using a smartphone and RFID reader, the user requires an NFC-capable smartphone.
►
Select the menu item “System”
→
“Authorisations”.
►
Follow the instructions in the app.
11.4.3. Viewing statistics
Statistics and other information about the wallbox can be viewed using the Spelsberg wallbox app.
►
Select the menu item “Statistics”.
►
Follow the instructions in the app.
12. Cleaning
Warnung
Risk of fatal electric shock
There is a risk of electrocution when working on the electrical components of the wallbox.
►
Only clean the charging cable when it is not connected to the vehicle.
►
Only clean the outside of the wallbox and the charging cable.
Achtung
Unsuitable cleaning agents can damage the wallbox.
►
Do not use any sharp or hard objects for cleaning.
►
Do not use water or a steam jet cleaner.
►
Clean the wallbox and the charging cable with a soft, dry cloth.
►
If necessary: Clean the wallbox with a soft, damp cloth. Stubborn dirt can be removed with a mild,
solvent-free, non-abrasive cleaning agent.
13. Maintenance
13.1. Updating the firmware
Firmware updates adapt the Spelsberg wallbox to new vehicle features, allow it to support new functions,
and fix bugs. The Smart Pro wallbox automatically carries out updates when it is connected to the internet.
You can find the currently installed firmware version under the menu item “System”
→
“Installation &
maintenance data” of the Spelsberg wallbox app.