Spelsberg Wallbox Pure, Руководство по эксплуатации продукта

Страница: 21 / 40

21
10.2. Instructions for installers on commissioning and configuring
the wallbox via smartphone and NFC.
Note
Installers can parametrise the entire wallbox system using the advanced settings.
Note
►
Only hold the smartphone up to the wallbox when prompted to do so by the app.
►
Hold the smartphone at the position indicated above the LED, similar to paying by
smartphone at a POS terminal.
►
If no communication is established, slowly move the smartphone around the indicated
position above the LED.
►
If the card wallet on the smartphone opens, the wallbox is not in NFC mode. Follow the
instructions in the app or check the FAQ section on the Spelsberg website.
►
Start the app.
►
Select the menu item “I’m an installer” and confirm service mode.
►
Select “Configure wallbox”.
►
Scan the setup QR code provided.
9
The wallbox data (serial number, production date, type/variant) is transferred to the app.
►
Follow the instructions in the app.
(Factory setting: 3-phase charging mode; 16 A installation current limit.)
►
Transfer the data to the wallbox via NFC when the configuration is complete. The smartphone must be
held near the RFID logo on the wallbox for this.
9
The set parameters are transmitted to the wallbox.
Note
During the data transfer, the app also reads and displays any wallbox system messages
messages. This means that the data transfer should be carried out even if no data or
parameters have been changed.
9 The wallbox is now ready for the first charging process.
Note
No data is stored on the smartphone after the configuration is completed.
10.3. Setting up the wallbox for the user/operator
Setting up the wallbox in the app enables the following functions for the user:
„
Status display in the app
„
Controlling the charging process via the app
„
Setting authorisations for the charging process
„
Viewing statistics on the charging processes
„
Advanced configuration options, such as integrating the wallbox into the home network
The wallbox can be added separately for additional users in the app on their smartphones. They do not have
to make any further configurations then.