PAGE 1 OF 2
S P E L L M A N H I G H V O L T A G E E L E C T R O N I C S C O R P O R A T I O N
HIGH VOLTAGE
MODULE
Spellman’s Bertan brand of 602C modular high voltage
power supplies offer well regulated, fixed polarity outputs
up to 20kV, that operate off a standard switch selectable
115/230Vac input. These fully enclosed modules are
designed for bench top or OEM applications like spec-
trometers, detectors, imaging and electron beam usage.
The output voltage can be controlled by either a local
internal potentiometer or by a customer provided ground
referenced signal for remote operation. Additionally
ground referenced output voltage and current monitor
signals are provided. A high voltage enable signal input
allows remote control of the supply.
TYPICAL APPLICATIONS
Spectrometers
Detectors
SPECIFICATIONS
Input Voltage:
115Vac, ±10%, 50/60 Hertz @ 0.5 amp
230Vac, ±10%, 50/60 Hertz @ 0.25 amp
Input voltage is fused and switch selectable
Output Polarity:
Positive or negative, specify at time of order
Output Voltage:
See “model ratings” table
Output Current:
See “model ratings” table
Voltage Regulation:
Line - ±0.001% of rated output voltage over
specified input voltage range
Load - ±0.002% of rated output voltage
for a full load change
Ripple:
See “model ratings” table
Stability:
≤0.01% per hour, after a 1/2 hour warm up
Accuracy:
Local control ±0.2%
Remote Programming ±(0.1% of s 0.1% of maximum)
Voltage Monitor ±(0.1% of r 0.1% of maximum)
Current Monitor ±(2% of r 1% of maximum)
Temperature Coefficient:
≤50ppm/°C
Arc/Short Circuit:
All units are fully arc and short circuit protected and will limit
continuous short circuit output current to less than 110% of
maximum rated output current.
Operating Temperature:
0°C to +50°C
Storage Temperature:
-40°C to +85°C
Humidity:
20% to 85% RH, non-condensing
Interface Connector:
9 pin Molex connector, mating connector and pins provided
AC Input Line Connector:
3 position terminal block
Output Connector:
10´ (3 meter) detachable HV cable is provided for units
up to 5kV; 10kV through 20kV: 59˝ (1.5 meter) cable.
Cooling:
Convection cooled.
Dimensions:
5.0˝H X 3.1˝W X 8.7˝D (128mm x 78mm x 220mm)
Weight:
≤6.75 pounds (3.1kg)
Regulatory Approvals:
Compliant to 2004/108/EC, the EMC Directive and
2006/95/EC, the Low Voltage Directive. UL/CUL recog-
nized, File E137710.
602C
•
1-20KV @ 10-15 WATTS
•
AC INPUT MODULAR POWER SUPPLY
•
115/230 VAC SELECTABLE
•
EXCELLENT REGULATION
•
VERY LOW RIPPLE
•
ARC/SHORT CIRCUIT PROTECTED
www.spellmanhv.com/manuals/600
Corporate Headquarters
Hauppauge, New York USA
+1-631-630-3000 FAX: +1-631-435-1620
e-mail: [email protected]
www.spellmanhv.com
128041-001 REV. H
Spellman High Voltage is an ISO 9001:2008 and ISO 14001:2004 registered company
Copyright © 2005 Spellman High Voltage Electronics Corp.
