Speech Technology Center ANF II, Руководство по эксплуатации

Страница: 68 / 80

DEVICE CONTROLLING VIA PC
65
In the Mask (Ethernet) box you can enter the subnet mask (if the static IP-address is selected).
In the Gateway box you can enter the address of the default gateway (if the static IP-address is selected).
In the
DNS-server
box you can enter the address of the DNS-server (if the static IP-address is selected).
In the
IP-address (USB)
you can enter the IP-address of the device when it is connected through the USB.
In the Monitoring port you can set the port of monitoring.
To save changes click Save , to cancel changes click Cancel .
7.9.9
Other settings
In the
Other settings
section (figure 150) you can control and change the indication and the USB-interface mode.
Figure 150 – Settings tab. Other settings
Use the Display backlights list to adjust the time of backlit deactivation from the moment of the last button press. It can
have the following values:
– no – device backlit is permanently on
– 15 or 30 seconds
– 1 minute.
You
can turn on or off recording level indicators and buttons LEDs using
Signal and buttons LEDs
options (figure 2 , position
10
).
The
USB mode
options allow selecting one of the USB-connection modes:
Web-interface
or
Card-reader
.
7.9.10
Default settings
In the Default settings section (figure 151) you can restore default settings of the device. To restore default settings, click the
Apply default settings button.
Figure 151 – Settings tab. Default settings