Speech Technology Center ANF II, Руководство по эксплуатации, Страница: 16 / 80

GETTING STARTED
13
3.8
Connecting to local network
To connect the device to local network, use the ETHERNET jack (figure
3
, position 24 ). For connection is used standard RJ45
cable (figure 16).
Figure 16 – Cable for connection to local network
RJ45 phone cable has a latch. To unplug a cable press on that latch.
3.9
Connecting to USB-port
You can connect the device to the PC through the USB port (figure 3 , position 29 ). The connection is performed using the
standard 5-connector cable 1 to connect to the MiniUSB (5 connectors) devices and socket 2 , which is connected to the USB-
port of the PC (figure 17).
Figure 17 – Cable for the connection to the PC
Before the connection of the device to the PC, make sure that PC-case is grounded. Ground connection is essential
if you use simultaneous connection of the device to the PC and external power supply and (or) external signal
source. Non-observance of these requirements can cause device breakdown.
To ground the device, use the ground terminal (figure
3
, position 19 ).