Speech Technology Center ANF II, Руководство по эксплуатации

Страница: 17 / 80

CONTROLS AND INDICATORS
14
4
CONTROLS AND INDICATORS
4.1
Controls
4.1.1
Power switch
Use ON/OFF power switch (figure
3
, position 22 ) on the back panel to turn power supply on and off. When the switch is set in
the ON position, the display will be turned on (figure 2, position 2 ).
4.1.2
Navigation buttons
Use navigation buttons , , , (figure 2 , position
3
) to move through the menu and select the proper menu
command or parameter within the limits of one level of menu multiple structure.
Press to set selected parameter or perform the selected menu command (including switching to the lower level of the
menu).
4.1.3
MENU button
Press the MENU button (figure 2 , position 4 ) to go to the higher level in menu structure without saving any changes, if they
have not been saved by pressing .
4.1.4
RECORD button
Press the
RECORD
button (figure 2 , position
6
) to turn the recording mode on or off.
Press the RECORD button to begin the recording; it also turns on the backlit of the button. The recording process activity will
be indicated by the word RECORD and recording time at the left bottom corner of the display (figure 18).
Figure 18 – Recording process indication
4.1.5
MONITOR button
Press the MONITOR button (figure
2
, position 5 ) to turn the listening of the point-to-point channel on or off.
Press the
MONITOR
button to begin the monitor; it also turns on the backlit of the button.
4.1.6
Volume control
Use
VOLUME
control (figure 2 , position
1
) to adjust volume level during audio records playback through the built-in speaker
or headphones. When the playback is turned on, you can see the adjusted volume settings (figure 19) at the bottom part of
the display (figure 2, position
2 ).
Figure 19 – Volume settings
4.1.7
Controls of the left and right channels
Use controls of left and right channels (figure
2
, position 7 and 9 ) to set the required signal level on recording channels. If the
recording mode is on, you can see the adjusted signal levels for each channel (figure 20) at the bottom part of the display
(figure 2, position
2
).
Figure 20 – Left and right channels value
4.2
Indicators
4.2.1
LCD
The LCD (figure
2
, position 2 ) resolution is 176х220. On the display, you can see the information about device operation,
parameters, commands, and levels of the menu.