Speech Technology Center ANF II, Руководство по эксплуатации

Страница: 48 / 80

MULTILEVEL MENU
45
5.7
Lines selection menu
The
Lines selection
menu (figure 101) is used for input and output lines control. To open the menu, press (figure 2,
position
3
).
Figure 101 – Lines selection menu
In the
Lines selection
menu, you can change the following parameters:
1. Input source . Select the Input source: built-in microphones, line input, phone line
2. Monitor . Select the output by playback: line output, speaker/headphones.
3.
Analog input mode
. Turn on the analog input mode.
4.
Analog input signal
. Select stereo signal output: one of the channels or both of them.
To select the required parameter, use and buttons, to open the parameter values, press . Use the MENU button
to return to the Lines selection menu without saving any changes.
Input source selection
Figure 102 – Lines selection menu. Input source
The
Input source parameter is used to select one
of the recording sources.
Use and buttons to select the required
recording source.
Press to save the selected parameter.
Use the
MENU
button to return to the
Lines
selection
menu without saving any changes.