3
Plan Your Installation
It is recommended to read through the entire manual before beginning your installation.
Follow all steps exactly. Reading this manual will also help you get all the benefits
from your system.
Your Premier Twist-Lock Drinking Water System can be installed under a sink or in a
remote location. Review the location options below and determine where you are going to
install your system.
Under The Sink Location
The Reverse Osmosis Filter Assembly and storage tank are normally installed in a
kitchen or bathroom sink cabinet. See Fig. 1.
A suitable drain point is needed for reject water from the Reverse Osmosis Filter.
Remote Location
You can also locate the Reverse Osmosis Filter Assembly and storage tank in a remote
location away from the Reverse Osmosis Tap. You will need a nearby water
source and drain point. See Fig. 2.
N
NOTE: Ensure the location is heated. Cold incoming water will adversely affect RO flow rate.
Check Space Requirements
Check size and position of items for proper installation into location chosen.
Overview and Site Preparation
There are eight easy steps to installing your Drinking Water system. They are as follows:
STEP
1
- Install Saddle Valve
STEP
2
- Install RO Drain Connector
STEP
3
- Install RO Filter Assembly
STEP
4
- Install Water Storage Tank
STEP
5
- Install RO Tap
STEP
6
- Connect Tubing for Water Supply Line from Saddle Valve to RO System Head
STEP
7
- Install RO System and Drain in Remote Location
STEP
8
- Sanitize, Pressure Test, Purge System
Prepare Site For Installation
1
Before starting, close the cold water shut-off valves.
2
Temporarily place tank and filter assembly into cabinet. Double check position of
items and space required for proper installation.
3
Remove tank and filter from cabinet and set aside.
