Spectrex SafEye Xenon 700S, Руководство пользователя

Страница: 47 / 80

Detector/Source Mounting
TM 799200 Rev. (4), April 2017 47
5.5.1 Tilt Kit
The following contents are included with the tilt mount kit
(
P/N 799640):
Table 14: Tilt Mount Kit
Item Qty Type/Model
Tilt Mount 1 799220
Screw 1 5/16” – 18 UNC x 3/4”
Spring Washer 1 No. 5/16”
5.5.2 Detector/Source Installation
(Figure 4 and Figure 5)

To install the detector/source:
1
Place the tilt mount holding plate (Item 1) in its designated
location and secure it with 4 fasteners through 4 holes of an
8.5mm diameter.
Notes:
 Skip this step if the tilt mount is already installed.
 Detector removal for maintenance purposes does not require
tilt mount removal.
2
Place the detector, with its conduit/cable inlets pointing
downwards on the detector holding plate of the tilt mount (Item
2). Secure the detector to the tilt mount with 5/16”-18UNC x 3/4"
screw with No. 5/16” spring washers (9, 10). Use ¼” Hex Key for
5/16” screw (Item 9).
3
Repeat steps 1–2 to install the source.