manualshive.com logo in svg

Spectranetics CVX-300, Руководство оператора

Поделиться
Скачать
Spectranetics CVX-300 Скачать руководство пользователя страница 18

18

7030-0068-26

28Jul16

Customer Service, Canada/US (719) 633-8333 / (800) 231-0978

Customer Service, 31 33 434 7050

CVX-300

® 

Excimer Laser System 

Version 26 

Operator’s Manual 

English / English

Stowable Energy Detector

The Energy Detector is located to the left of the laser/catheter coupler. The Energy Detector 
is used to calibrate fiber optic catheters prior to use, and must be pulled up into position to 
facilitate system calibration.

Return the Energy Detector to the storage position by pushing it back into the unit and 
closing the protective cover.

NOTICE
At no time should the energy detector or its mounting pole be used in an attempt to move 
the CVX-300.
As with all CVX-300 units, it is necessary to keep the area around the Catheter Connector, 
Energy Detector, and Control Panel clean, dry and free of contaminants.

Open 

Protective 

Cover

Extend the Energy 

Detector to the 

fully up position

Push Energy 

Detector back into 

the unit and close 

the Protective Cover

Содержание CVX-300

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды