Spectracom VelaSync 1225, Руководство пользователя

Страница: 45 / 272

6.
In this panel, you can perform the following actions:
enable or disable the ethernet port
enable DHCP
disable DHCP (selecting this function will provide access to the remaining
settings)
assign a static IP address
set netmask values
set Gateway, domain, DNS, and MTU values.
Note: Wait to click Submit or Apply until fully finished
assigning values to avoid errors.
In order to apply a static IP address to any Ethernet port, DHCP must be disabled.
To update network settings using a serial connection, please see "Setting Up an IP
Address via the Serial Port" below .
2.7.2 Setting Up an IP Address via the Serial Port
VelaSync's rear panel serial port connector is a standard DB9 male connector. Com-
munication with the serial port can be performed using a PC with a terminal emulator
program (such as PuTTY or TeraTerm), using a pinned null-modem standard DB9F to
2.7 Configuring IP Address(es)
CHAPTER
2
•
VelaSync User's Manual Rev. 3 33