Spectracom VelaSync 1225, Руководство пользователя

Страница: 135 / 272

This Reference Phase Offset Data is plotted over time (abscissa) in the Reference Mon-
itor panel in the center of the screen. Use the check boxes in the References panel (2)
to select the reference(s) for which you want to plot the phase offset data. Use the
handles
(3) to zoom in on a time window.
The scale of the axis of ordinate (4) is determined by the largest amplitude of any of the
references displayed in the current time window. Use the checkboxes in the Refer-
ences panel on the right to remove references from the graph, or add them to it.
3.3.3 The GNSS Reference
With most applications, VelaSync will be setup such that it utilizes a GNSS signal as the
primary (if not the only) timing reference.
VelaSync's GNSS receiver utilizes the signal provided by the GNSS antenna.
The GNSS receiver analyzes the incoming GNSS data stream and supplies the GNSS
time and 1PPS (Pulse-Per-Second) signal to VelaSync's timing system. The timing sys-
tem uses the data to control the System Time and discipline the oscillator.
While VelaSync’s default GNSS receiver configuration will likely be adequate for most
applications, it is advisable that you review the options and change settings as needed,
particularly if you are experiencing poor signal reception.
To access the GNSS Receiver settings:
3.3 Managing References
CHAPTER
3
•
VelaSync User's Manual Rev. 3 123