Page 2-7
2.3
2.3
2.3
2.3
2.3
SYNCHRONIZA
SYNCHRONIZA
SYNCHRONIZA
SYNCHRONIZA
SYNCHRONIZATION CONNECTION
TION CONNECTION
TION CONNECTION
TION CONNECTION
TION CONNECTION
The TimeView 400 can be synchronized by the following
Spectracom products:
Model 8182, NetClock/2, WWVB Master Clock
Model 8183, NetClock/GPS, GPS Master Clock
Model 8183A, NetClock/GTP, GPS Global Time Provider
Model 8186, TimeBridge, Wireless Time Link
Model 8189, NetClock/NTP, GPS Network Time Pro-
vider
The TimeView 400 connects to the RS-485 output port
found on the NetClock Master Clocks and TimeBridge.
These ports provide a continuous once-per-second time
data stream. The TimeView 400 automatically detects the
data format and baud rate of the synchronizing data
stream.
2.3.1
2.3.1
2.3.1
2.3.1
2.3.1
Connection to NetClock/2
Connection to NetClock/2
Connection to NetClock/2
Connection to NetClock/2
Connection to NetClock/2
The Model 8182 NetClock/2, provides the RS-485 time
data stream on the Remote Output connector. The Re-
mote Output is a DB9 female connector. Refer to Figure
2-3 for connector pin numbering.
FIGURE 2-3 NETCLOCK/2 REMOTE OUTPUT
FIGURE 2-3 NETCLOCK/2 REMOTE OUTPUT
FIGURE 2-3 NETCLOCK/2 REMOTE OUTPUT
FIGURE 2-3 NETCLOCK/2 REMOTE OUTPUT
FIGURE 2-3 NETCLOCK/2 REMOTE OUTPUT
CONNECTOR
CONNECTOR
CONNECTOR
CONNECTOR
CONNECTOR
Connect the TimeView 400 to the NetClock/2 RS-485
data bus as shown in Figure 2-4. The mating 6-pin
t
erminal block is furnished in the TimeView 400 ancillary
kit.
